Assorted Metals for Fabrication, SOE & Structural Needs

Angles, flats, rounds, tube, channels, sheet/plate, expanded metal and more—cut-to-size, holes/slots, bevels, and coatings (HDG/prime/epoxy). Quick quotes and on-time delivery.

Get a Fast Quote

Call

Where these are used

Fabrication & Misc. Metals (stairs, rails, frames, guards)
SOE / Temporary Works (bracing details, clips, small components)
Structural & Renovations (fill-ins, brackets, stiffeners, gussets)

What we supply (categories with one-liners)

Angles (L-shapes) — Equal/unequal legs; common thicknesses; cut-to-length
Flats / Strips — Widths per spec; great for splice bars, stiffeners
Rounds / Squares (solid) — Pins, posts, misc. components
Square Tube / Rectangular Tube — Structural/architectural; miter & coping available
Channels (C/MC) — Companion shapes for frames/walers
Tees — Rolled or cut from WF; by request
Sheet / Plate (thin) — Gauge sheet to light plate for covers/guards
Expanded Metal / Perforated — Walkways, screens, guards
Bar Grating — Smooth/serrated; by request
Stainless / Aluminum — Common shapes on request (grades & finishes vary)

Processing: Cut-to-length, holes/slots, bevels/chamfers, miter cuts, light coping/fit-ups, part tagging/kitting.
Coatings: Hot-dip galvanizing, prime paint, epoxy (per spec).
Documentation: submittals, product data; MTRs when available per mill/spec.

1/13

Typical packages

Misc. metals kit: angles + flats + tube + hardware holes/slots, tagged/kitted
SOE details kit: channels/angles + plate clips with holes + prime/HDG
Fabrication set: tube frames + gussets + light plate covers + epoxy/prime coat

Quote checklist

Category & sizes: (e.g., angle L×L×t, tube OD/WT or H×B×t, flat W×t, lengths)
Quantities & cut lengths (e.g., 12 pcs × 10'-0")
Holes/slots: Ø, pattern, spacing/edge distances (attach sketch if possible)
Edges/cuts: bevels, miters, coping/fit-ups
Coatings: HDG / Prime / Epoxy
Delivery: project city/state, needed-by date; staged/timed drops
Docs: submittals, MTRs (if required)

FAQs

1.Do you cut, drill, and prep parts for install? Yes—cut-to-length, holes/slots, bevels, miters, and light coping/fit-ups per sketch/drawing.

2. Can you tag/kit parts for the field? Yes—piece marks and simple kitting available to speed installation.

3. What coatings do you offer? Hot-dip galvanizing, prime paint, and epoxy per project spec.

4. How fast can you ship? Common sizes are often quick; coatings and complex hole/fit-ups can add time.

5. Do you provide documentation? Yes—submittals and cut sheets; MTRs when available per mill/spec.